| Expected life | 35 M cycles | Infinite rotation |
| Supply voltage | LV: 5 0.5 Vdc
HV: 10 Vdc to 30 Vdc | LV: 5 0.5 Vdc
HV: 10 Vdc to 30 Vdc |
| Supply current (max.) | LV: 20 mA
HV: 25 mA | LV: 32 mA
HV: 47 mA |
| Output type | Standard/Inverted, Ratiometric/Non-ratiometric | Standard/Inverted, Ratiometric/Non-ratiometric |
| Output signal delay | 4 ms typ. | 4 ms typ. |
| Overvoltage protection | 10 Vdc | |
| Reverse polarity protection | -10 Vdc | -30 Vdc |
| Output to ground short circuit protection | Continuous | Continuous |
| Resolution | 12 bit | 12 bit |
| Output load resistance (pull down to ground) | 10 kOhm typ. | 10 kOhm typ. |
| EMI radiated immunity | 100 V/m per ISO11452-2 (200 MHz to 1000 MHz) | 100 V/m per ISO11452-2 (200 MHz to 1000 MHz) |
| EMI conducted immunity | 100 mA BCI per ISO11452-4 (1 MHz to 200 MHz) | 100 mA BCI per ISO11452-4 (1 MHz to 400 MHz) |
| Operating temperature range | -40 C to 125 C [-40 F to 257 F] | -40 C to 125 C [-40 F to 257 F] |
| Ingress protection | IP69K | IP69K |
| Media compatibility | Heavy transportation fluids | Heavy transportation fluids |
| Shock | 50 G peak | 50 G peak |
| Vibration | 20 G peak | 20 G peak |
| Salt fog concentration | 5% 1% for 240 hr per SAE J1455 | 5% 1% for 240 hr per SAE J1455 |
| Air gap (bare magnet actuator) | | 3,00 mm 0.5 mm [0.12 in 0.02 in] |
| Air gap (housed magnet actuator) | | 2,00 mm 0.5 mm [0.08 in 0.02 in] |
| Actuator misalignment | | 2.002,00 mm [0.08 in] max. |
| Mounting screw sizes (sensor to mounting surface) | Non-magnetic, stainless steel M5 screws and 10 mm [0.39 in] OD washers | Non-magnetic, stainless steel M4 X 0.7 screws and 8 mm [0.31 in] OD washers |
| Mounting screw sizes (lever to mounting surface) | Non-magnetic stainless steel M6 screws | |
| Mounting screw sizes (housed magnet actuator to actuator mounting) | | Non-magnetic, stainless steel M3 X 0.5 plain cup point set screws |
